|
TRIGON Chemie GmbH |
Pentasol AGS-DM |
||
|
||
| CAS-No.: | 106-65-0 | n=0 Dimethyl succinate |
| EINECS-No.: | 203-419-9 | |
| CAS-No.: | 1119-40-0 | n=1 Dimethyl glutarate |
| EINECS-No.: | 214-277-2 | |
| CAS-No.: | 627-93-0 | n=2 Dimethyl adipate |
| EINECS-No.: | 211-020-6 | |
| Specification: | Acid no. (mg KOH/g): | 0.5 max |
| Appearance: | clear, colorless liquid | |
| Colour (Hazen): | 15 max | |
| Content diester: | 99% min | |
| Dimethyl adipate: | 12 - 23% | |
| Dimethyl glutarate: | 55 - 65% | |
| Dimethyl succinate: | 15 - 25% | |
| Water: | 0.2% max | |
| Typical properties: | Auto ignition: | 365°C |
| Boiling point: | 200 - 230°C | |
| Co-efficient of thermal expansion @ 20°C: |
|
|
| Elec. resist. @ 24°C(mΏ): | 0.5 | |
| Flash point: | 100°C | |
| Melting point: | - 25°C | |
| Molecular weight: | 160 | |
| Refractive index: | 1.423 - 1.425 | |
| Solubility in water @ 20°C: | 5% | |
| Spec. grav. @ 15.5°C (g/ml): | 1.09 |
|
| Vap. press. @ 20°C (mmHg): | 0.1 max |
|
| Viscosity @ 25°C (cSt): | 2.4 - 2.5 | |
| Applications: | Pentasol AGS-DM is an inexpensive, low toxicity, high boiling point, low smell solvent. It finds use in resin cleaners, hard surface cleaners, heavy duty hard cleaners, polishes, floor wax strippers, ink cleaners, paint strippers, graffiti removers, carpet shampoos etc. | |
| Solubility: | Pentasol AGS-DM can replace following solvents: Methylene chloride, isophorone, butyl diglycol, glycol ethers, cresylic acid, glycol ether acetate, ketones, acetone. | |
| Solvents and resins show good solubility in Pentasol AGS-DM. New formulations using Pentasol AGS-DM can be made easily and quickly, with cost savings and reduced toxicity. Pentasol AGS-DM has a similar solubility profile to isophorone, diacetone alcohol and 2-ethoxyethyl acetate (ethyl glycol acetate). In order to optimise the solvent properties, Pentasol AGS-DM is usually mixed with other solvents. Solubility in typical solvents: | ||
| Alkohols: | soluble | |
| Esters: | soluble | |
| Glycols: | soluble | |
| Glycol ethers: | soluble | |
| Glycol ether acetates: | soluble | |
| Halogenated solvents: | soluble | |
| Heptane: | insoluble | |
| Hydrocarbons (except xylene and heptane): | soluble |
|
| Ketones: | soluble | |
| Water: | low solubility (5%) Pentasol AGS-DM + 10% non-ionic surfactant (e.g. synperoic AS ) is soluble in water | |
| Xylene: | partially soluble | |
| Most resins are soluble in Pentasol AGS-DM e.g.: Acryl, alkyd, amino, cellulose, epoxy, phenol, phenoxy, polyester imide, polyester, polyvinylacetal, styrene, urethane resins. Polyvinylacetate is soluble in a mixture of Pentasol AGS-DM and N-methyl-2-pyrolidone (70:30). | ||
| For further details on toxicity and environmental aspects, see our safety data sheets. | ||
| Packaging: | bulk in tankers e.g. 220 kg steel drums | |
| HS Taric-No.: | 2917 19 90 | |
| Although every effort has been made to ensure that the information contained in this data sheet is reliable, we cannot be held responsible for the correctness of the information or for any loss, injury or damage which may occur from its use. Also, suggestions of uses should not be taken as inducements to infringe any particular patent. | ||
| November 1999 js | ||
| TRIGON Chemie GmbH, Schlossstr. 24, D-36381 Schlüchtern, Germany |
| TEL. ++49 6661 96590 * FAX ++49 6661 919276 * email info@trigon-chemie.com * http:// www.trigon-chemie.com |